METREL EurotestXC MI 3152 Скачать руководство пользователя страница 57

Страница: 57 / 203

MI 3152(H)

Eurotest

XC (2,5 kV)

Memory Organizer

View / edit parameters and attachments.

Parameters and attachments of the Structure object can be viewed or edited.

Refer to chapter

5.1.5.3 View / Edit parameters and attachments of a Structure

object

for more information.

Adds a new measurement.

The instrument goes to the Menu for adding measurement into structure. Refer to
chapter

5.1.5.5 Add a new measurement

for more information.

Adds a new Structure object.

A new Structure object can be added. Refer to chapter

5.1.5.4 Add a new Structure

Object

for more information.

Attachments.

Name and link of attachment is displayed.

Clones a Structure object.

Selected Structure object can be copied to same level in structure tree (clone). Refer
to chapter

5.1.5.6 Clone a Structure object

for more information.

Copies & Paste a Structure object.

Selected Structure object can be copied and pasted to any allowed location in
structure tree. Multiple “Paste” is allowed. Refer to chapter

5.1.5.8 Copy & Paste a

Structure object

for more information.

Views and edit comments.

The instrument displays comment attached to the selected Structure object or opens
keypad for entering a new comment.

Deletes a Structure object.

Selected Structure object and sub-elements can be deleted. User is asked for
confirmation before the deleting. Refer to chapter

5.1.5.11 Delete a Structure

object

for more information.

Renames a Structure object.

Selected Structure object can be renamed via keypad. Refer to chapter

5.1.5.13

Rename a Structure object

for more information.

Содержание EurotestXC MI 3152












































































































































































































Результаты поиска

Содержание EurotestXC MI 3152

Отзывы:

Похожие инструкции для EurotestXC MI 3152

Бренды по названию

Популярные бренды

METREL EurotestXC MI 3152, Инструкция по эксплуатации

Результаты поиска

Содержание EurotestXC MI 3152

Отзывы:

Похожие инструкции для EurotestXC MI 3152

Бренды по названию

Популярные бренды