background image

Disconnect the negative battery terminal to 
prevent an accidental short circuit.  Remove 
(2) screws below the ashtray.  Unclip the 
dash trim bezel.  Disconnect the cigarette 
lighter wiring and remove the bezel.  
Remove (2) bolts securing the rear of the 
factory head unit and disconnect the wiring.

ACURA Legend  1990

2

1

Disconnect the negative battery terminal to 
prevent an accidental short circuit.  Remove 
the access cap from the climate control 
cluster and (1) screw exposed.  Unclip the 
cluster and remove (2) screws exposed.  
Remove the ashtray and (2) Phillips screws 
exposed.  Remove the cover caps from 
each front corner of the center console and 
the screws exposed.  Open the storage 
compartment, lift up the carpet and remove 
(2) screws exposed.  Lift up on the center 
console and remove.  Unclip the radio trim 
bezel and disconnect the wiring.  Remove 
(2) bolts from the back of the factory head 
unit and disconnect the wiring.    

ACURA Vigor  1992-94

2

1

3

3

Modify the factory radio housing by trimming the 

shaded 

portions of the housing lip.  

Skip to the 

Installation Instructions for ALL VEHICLES on Page #11.

Modify the factory radio housing by trimming the 

shaded 

portions of the housing lip.  

Skip to the 

Installation Instructions for ALL VEHICLES on Page #11.

¾"

¾"

¾"

¾"

¼"

¼"

¼"

¼"

1"

1"

1"

1"

1¼"

1¼"

1¼"

1¼"

Factory radio 

housing 
opening

Factory radio 

housing 
opening

7

4

Cut and remove the 

TOP

 clips from the 

Radio Housing.

  

Cut and remove the 

TOP

 clips from the 

Radio Housing.

  

Содержание 99-7892







Отзывы: