9
2
Disconnect the negative battery terminal to
prevent an accidental short circuit. Remove
(3) screws from each side of the center
console and remove the console. Remove
(2) screws securing the factory head unit to
the sub-dash support bracket. Slide the
head unit/pocket assembly out and
disconnect the wiring.
1
ACURA Integra 1990-93
2
Disconnect the negative battery terminal to prevent an accidental short circuit. Remove the
ashtray and (1) ¾" #8 Phillips screw exposed. Open the storage compartment and remove (2)
#8 Phillips screws exposed. Remove the cupholder tray and (3) #8 Phillips screws inside. Lift
the center console out and remove (2) Phillips screws exposed at the base of the dash trim
bezel. Unclip the bezel and remove. Remove (2) hex-head screws securing the factory head
unit and disconnect the wiring.
1
HONDA Accord 1994-97
Mount the
Rear Support Bracket
to the back of
the pocket with
(2) Phillips Screws
supplied.
Skip to the Installation Instructions for ALL
VEHICLES on Page #11.
3
2
Cut and remove the
SIDE
clips from the
Radio Housing.
Cut and remove the
TOP
clips from the
Radio Housing.
ISO-DIN HEAD UNITS:
Mount the
Rear Support Bracket
to the back of the pocket with
(2)
Phillips Screws
supplied.
Skip to the Installation Instructions for ALL VEHICLES on Page
#11.
3
