Metos PROVENO S 100, Инструкция по установке и эксплуатации

Страница: 39 / 68

2.11.2005 Rev. 1.5
Installation
31
5. Installation
5.1 General
Please observe the instructions given in this chapter concerning the installation and ad-
justments that must be done before taking the Proveno combi-kettle into use. Strict ob-
servance of the instructions prevents malfunctions and damages potentially caused by
defective installation.
Do not switch the power on if the installation place is damp or wet (building site condi-
tions).
5.1.1 Operating conditions
The Proveno combi-kettle can be used in a normal, air-conditioned professional kitchen.
The room temperature of the installation place must not 40°C and the relative hu-
midity must be less than 80% (condensation on surfaces not allowed to occur). If the tem-
perature of the facility in winter conditions is below 0°C, the steam generator of the
combi-kettle must be drained and the kettle must be emptied to avoid damage caused by
freezing. The kettle's pipes and solenoid valve bodies must be emptied at the same time.
5.1.2 Possible interference from the surroundings (to the surroundings)
The Proveno combi-kettle fulfils the requirements of the EMC directive concerning the
emissions and immunity to electromagnetic disturbances. In case there are electronically
controlled appliances and, in particular, devices fitted with a frequency converter in the
installation place, it is recommended to ensure their conformity with the relevant regula-
tions and that their cabling has been done according to instructions.
5.1.3 Storage
The Proveno combi-kettle must be stored in a dry place, at a temperature b10 and
+40°C. The kettle should be kept in its transport package during storage.
If the appliance is stored in construction site conditions, special care must be taken not to
damage it through other operations on the site.
• Protect the exterior of the combi-kettle from scratches and knocks.
• Protect the combi-kettle from construction site dust.