background image

2.11.2005

Rev. 1.5

Operation instructions

18

not manage to set the temperature while the temperature display was blinking, press the
temperature button again and select the desired temperature with the central dial.

Temperature setting and temperatures displayed:

Heating is only switched on when the kettle is in an upright position (cooking position).
If the heating function is selected when the kettle is not in an upright position, the message
'PoS' appears on the display indicating that the heating will not switch on because the ket-
tle is not in the cooking position. Open the lid and revert the kettle to the cooking position.

4.2.5

Changing the temperature

Press the temperature button.

Select the temperature desired.

4.2.6

Stopping the cooking

Press the temperature button for a long time (approx. 2 seconds).

The heating goes off when 'On' appears on the display.

4.2.7

Mixing functions 

Starting the mixer (manual mixing)

Switch on the appliance. The temperature display indicates 'On'.

Select the mixing function. Message '15' appears on the mixer display.

Start the mixer.

You can adjust the mixing speed with the central dial while the mixer display is blinking.

Changing the speed

When the mixer is running, press the start/pause button once.

Select the speed (15-140 rev./min.) with the central dial.

NOTE: You cannot change the mixing speed, if a mixing program (P1-P6) is in operation.
However, it is also possible to start power mixing when a mixing programs is running (see
"Power mixing during mixing").

0 -  50°C

kettle inner surface temperature on the display

51 - 100°C

food temperature on the display

101 - 120°C

steam jacket temperature on the display

Содержание PROVENO S 100





































































Отзывы: