Metos 72/02CG, Инструкция по установке и эксплуатации

Страница: 33 / 72

2.9.2003 Rev. 1.0
Installation
27
5.14 Checking operation
1. Start up the appliance by following the instructions given in chapter "Using the ap-
pliance" ;
2. check for gas leaks;
3. check for flame stability throughout the whole control range by going from high
to low.
5.15 Staff training
Inform all personnel assigned to operate the appliance on how to use it by referring to this
user’s manual and hand them out the manual.
5.16 Rating plate
The rating plate showing the specifications of the corresponding model is applied in the
position shown in the installation and connection drawings and includes the data listed be-
low:
Manufacturer:
Model: (see front page)
Serial number:
Year of manufacture:
Category: (see "Technical specifications table" )
Heating power: (see "Technical specifications table" )
Natural gas consumption: (see "Technical specifications table" )
Liquid gas consumption: (see "Technical specifications table" )
Supply pressure:
natural gases: G20 (see "Table of categories and gas pressure values" fur-
ther above)
liquid gases (butane/propane): G30/G31 (see "Table of categories and gas pressure values" fur-
ther above)
town gas: G110/G120 (see "Table of categories and gas pressure values" fur-
ther above)
Gas inlet pipe size: (see "Technical specifications table" )
Supply voltage: (see the label on the packaging and on the unit)
Appliance pre-set to use: