Metos 72/02CG, Инструкция по установке и эксплуатации

Страница: 17 / 72

2.9.2003 Rev. 1.0
Operating instructions
11
4.2.2 Turning the open burners on and off
• To light the pilot flame, press the knob and turn it anti-clockwise to the position
shown as item 14 in Fig. 3;
• hold down the knob and at the same time place a flame next to the pilot burner;
• after lighting the pilot flame, hold down the knob for 15 more seconds to allow the
thermocouple to heat. If the pilot flame goes out when you release the knob, repeat
the operation;
• burner output can be controlled within a range between positions shown as item 15
and item 16 in Fig. 3;
• to turn off the main burner, turn the knob clockwise to the position shown as item
14;
• to turn off the pilot flame as well, turn the knob clockwise to the "OFF" position
(item 13).
Fig. 3
13. "OFF" position
14. "PILOT FLAME LIGHTING" position
15. "HIGH" position
16. "LOW" position