16
SERVICE
METER recommends checking the ROS 1 daily to see if a more thorough cleaning is needed. For a
more thorough cleaning, use the following steps to wash, rinse, and dry each area.
1. Turn the ROS 1 power off.
2. Open the sample chamber lid to expose the sample chamber.
3. Clean, rinse, and dry the sample chamber lid.
4. Remove the carousel by removing the two thumb screws in the center of the carousel
(
and
Figure 10
).
Figure 9 Remove Thumb Screws
Содержание ROS 1
