ES-2
1
INTRODUCTION
1
Introduction
METER designed the ES-2 sensor to measure pipe water, tank water
(when used with protective cap).A thermistor in thermal contact
with the probe provides water temperature, while the screws on the
surface of the sensor form a four-electrode array to measure electrical
conductivity. This manual should help you understand the sensor
features and how to use it successfully.
1.1
Customer Support
There are several ways to contact METER if you ever need assis-
tance with your product, have any questions, or feedback. METER
has Customer Service Representatives available to speak with you
Monday through Friday, between 7am and 5pm Pacific time.
Note: If you purchased your sensor through a distributor, please con-
tact them for assistance.
Email:
or
Phone:
509-332-5600
Fax:
509-332-5158
If contacting us by email or fax, please include as part of your mes-
sage your instrument serial number, your name, address, phone, fax
number, and a description of your problem or question.
1.2
About This Manual
Please read these instructions before operating your sensor to ensure
that it performs to its full potential.
1
