Pawkit
4
GETTING STARTED
3. Once you have the Pawkit properly positioned over the sample
cup, you are now ready to take readings.
4. To close the instrument, reverse the opening procedure. With
one hand holding the case near the LCD pull down on the
plastic sensor cover tab with the other hand and rotate until it
snaps into the closed position covering the sensors.
4.3
Taking Measurements
1. Make sure the sample cup is positioned as described in the
Sample Placement section.
2. Press the left button (I) to turn on the instrument. It displays
the last reading taken. This allows you to begin a measurement
and leave without having to attend the instrument throughout
the measurement. If it is already on, proceed to the next step.
15
