Metaxas & Sins solitaire, Руководство пользователя

Страница: 12 / 45

UNPACKING
Carefully remove the SOLITAIRE from it’s FOAM PACKING taking note of how
it’s inserted [in case you wish to reuse the Flight Case for future transport].
Using the Alun-key set, you can remove the top ampli fi er module cover and
bottom plate to ensure that the 2 ampli fi er modules and one VU module haven’t
become unseated from their PCB connectors during transit.
Steps for Connection
1. Ensure that the front ON/OFF switch is in the OFF position before connecting
the ampli
fi er into your system [VU lights are OFF].
2. Once connected, ensure that there are no ‘short circuits’ in the speaker wires,
then proceed to switch the unit ON.
For the best results, it is recommended that the unit is powered on for at least 15
minutes before critical listening is attempted.
Protection CircuitsThe output stage of the ampli fi er is fused with +/- 3Afast blow
fuses [M205 type] which protects the ampli fi er in case of operating faults.
Two 4-pole high current relays with DC sensing protection is also included.
Mains Fuse: [240V - 5AMP , 115V -10A ] A SLOW BLOW DA205 Type fuse is
next to the AC MAINS SOCKET located on the underside of the ampli
fi er.
If this blows,simply replace with the same rating fuse. If the fuse continues to
blow, please contact us immediately, but also refer to the Maintenance Section
of this manual for further instructions.
unpacking and
connecting