3
EN
3. General information
The safety, reliability and performance of the appliance is
only guaranteed by METASYS if the following instructions are
observed:
Assembly, alterations or repairs may exclusively be carried out
by authorized service personnel in compliance with EN Standard
60601-1 (International Standard for Medical Electrical Apparatus, in
particular Part 1: General Rules for Safety).
The electrical installation must comply with the regulations of the IEC
(International Commission for Electrical Engineering).
The apparatus must exclusively be used in conformity with the
instructions for installation, operation and maintenance.
Only original parts may be used for repairs or replacements.
All the guidelines provided by the manufacturer on the correct use of
the amalgam separator COMPACT Dynamic are followed.
After commissioning, complete the proof of installation at the front
page of this manual and send this to METASYS in order to define the
warranty period.
All inspection and service work must be entered into the device docu-
mentation at the first pages of this manual
When requested by an authorized engineer, METASYS agrees to make
all documents available for the use of technically qualified service
personnel.
METASYS accepts no responsibility for damages caused due to external
factors, such as wrong installation, improper use of the apparatus or
unauthorized technical intervention.
Users must study equipment and assure themselves of its good
condition before every use.
Certificates of recycling for the amalgam waste (provided by recycling
company) must be kept in accordance with national regulations.
When the complete amalgam separator is dismantled at the end of
its service life, it must be returned to the manufacturer for orderly
disposal.
General information
Practice personnel, technicians
