background image

Safety

03.05.2018

page 9

Safety  Plate rolling machine RBM 610-8  ; Version 1.05

 ©

 2018

GB

after each maintenance and repair.

Check that the prohibition, warning and information labels as well as the markings on the
bending machine

are readable (possibly clean),

are complete (replace if necessary).

INFORMATION

Use the overview below to organize the exams.

1.8

Protective clothing

For some jobs you need body protection as protective equipment.

Protect your face and eyes: Wear a helmet with a face shield for any work that puts your face
and eyes at risk.

Use protective gloves when picking up sharp-edged parts.

Wear safety shoes when attaching, removing or transporting heavy parts.

Wear ear protection if the noise level (immission) at your workstation is greater than 80 dB (A).

Before starting work, make sure that the prescribed body protection products are available at the
workplace.

ATTENTION!

Contaminated, potentially contaminated body protection agents can cause illnesses. 
Clean them after each use and once a week.

1.9

For your own safety during operation

We refer you to concrete dangers when working with and on the bending machine in the
description of this work.

WARNING!

Before switching on the bending machine, make sure that it does not endanger persons 
or damage things.

Refrain from any safety-related work:

Make sure that no one is endangered by your work.

Be sure to adhere to the instructions in this manual during installation, operation, main-
tenance and repair.

Standard check

Facility

Inspection

OK

Protective covers

Mounted, firmly screwed and not damaged

Signs and Marks

Installed and readable

Date:

Examiner (signature):

Содержание RBM 610-8































Отзывы: