Assembly
03.05.2018
page 14
Assembly Plate rolling machine RBM 610-8 ; Version 1.05
©
20
18
GB
Danger!
Tighten the fastening screws on the bending machine so that they are secure and can not be
torn or tilted during operation.
Over-tightening mounting screws, especially in combination with uneven ground, may break the
base of the machine.
3.5.2
Before first use
DANGER!
Before using the round bending machine for the first time, lubricate the bearings!
We assume no liability for damages due to improper commissioning.
Before putting the bending machine into operation, carefully read the operating instructions. This
allows you to safely start up the machine. Follow the safety instructions in the operating instruc-
tions.
3.5.3
First use
WARNING!
The first time the bender is put into operation by inexperienced personnel, you endanger people
and equipment.
We assume no liability for damages due to improper commissioning.
"Qualification of staff" on page 7
