Safety
03.05.2018
page 10
Safety Plate rolling machine RBM 610-8 ; Version 1.05
©
20
18
GB
Do not work on the ring bending machine, if your ability to concentrate for some reason -
such. B. the influence of drugs - is reduced.
Make sure that nobody puts your work at risk.
Only work on the machine when the bending rollers are free to run.
Do not use the machine for purposes it is not intended to, for example for bending mineral
materials.
Observe the maximum dimensions of the work "Machine data" on page 12 given in
the technical data.
Note that using tools other than those recommended by the manufacturer may result in injury
to you and other accessories.
Do not leave any tools stuck. Before starting work, check that all repair and adjustment tools
have been removed.
Do not leave the machine unattended and keep a sufficient safety distance to the moving
machine parts.
1.9.1
Using hoists
WARNING!
Severe to fatal injuries from damaged or unsuitable hoists and load lifting devices that
break under load.
Check hoisting gear and load attachment
• sufficient carrying capacity,
• perfect condition.
Observe the accident prevention regulations of the professional association responsible
for your company or other supervisory authorities.
Fix the loads carefully. Never step under suspended loads!
1.9.2
Mechanical maintenance
After your work, install all the protective and safety equipment removed for the maintenance
work, such as:
covers,
Safety instructions and warning labels,
Ground wire.
After the replacement, check their function!
1.9.3
Accident report
Inform supervisors and the company Stürmer Maschinen GmbH immediately about accidents,
possible sources of danger and "near misses".
"Almost" accidents can have many causes.
The faster they are reported, the faster the causes can be resolved.
