Metallkraft HPS 115 DS, Руководство по эксплуатации

Страница: 13 / 42

- 11
4. PROFILE CUTTING STATION
The machine are equipped as standard with the blades for cutting round and quadrangle bars.
Through additional equipment, it is possible to cut at the machine U-section, I-section and T-
section profiles in this clearance. The blades are held by simple squeezing jaws which ensure
an easy equipment arrangement at the machine without any detailed adjustment.
SAFETY PRECAUTIONS
 Never place your hand or fingers inside the blade.
 Do NOT overload the machine
 Use holder fitted on this station for a better work
5. NOTCHING STATION
The notching station has been equipped as standard with a rectangle unit and threading table
having adjustable counter holders, which enable a repeatable positioning. Additional
installations are available for narrow widths or V notching of angles up to 45
0 (V). Furthermore,
it is possible to have units for forming at bar ends and for easy notching works.
SAFETY PRECAUTIONS
 Never put any part of your body under the blade
 Use protective gloves or protective cages for very small works
 Do NOT overload the machine
SHOWS OF THE FIVE WORK STATIONS
STANDARD SPECIFICATIONS
 Punch and die Ø22
 Punch holder
 Flange cutting blade
 Notching blade
 Centralized lubrication
 Crescent key
 User's manual