![Metal Motorsports 150KT Скачать руководство пользователя страница 40](http://html1.mh-extra.com/html/metal-motorsports/150kt/150kt_owners-manual_1776963040.webp)
CHAIN
CHAIN AND SPROCKET
INSPECTION
Inspect drive chain for wear, rust, bound
links, proper lubrication and proper
tension.
If drive chain has a problem, correct or
replace. Contact a service center for chain
replacement.
A worn drive chain could also mean the
sprockets may be worn.
Look for the following on sprockets (1):
Worn teeth,broken or damaged teeth,
loose sprocket mounting nuts.
If sprockets show signs of wear,
contact a service center for replacement.
5 - 15mm
(0.2 - 0.6in)
CHAIN TENSION
Check tension of drive chain (2) , chain
tension should be 5 - 15mm (0.2 - 0.6in)
Chain tension (slack)
Adjustment
1. Loosen jam nut (3) on Chain tensioner
(4)
2. Adjust chain tension by turning ten-
sioner nuts (5). Clockwise will tighten the
chain. Counter clockwise will loosen the
chain.
3. Once the chain is at the correct tension
re-tighten Jam nut (3).
4. Re-check chain tension.
2
4
1
Lubricating the chain before each ride will
help to ensure maximum life of the chain
and sprockets.
Instructions for cleaning and
chain lubrication:
1. Clean chain with warm soap and water
and allow to dry.
2. Lubricate chain with chain lube.
CHAIN LUBRICATION
MAINTENANCE
36
3
5
Checking chain tension while the engine is
running could cause serious injury.
Always make sure engine is off before
checking drive chain tension.
!
WARNING
Содержание 150KT
Страница 48: ...ELECTRICAL SCHEMATIC 44...
Страница 53: ...NOTES 49...
Страница 54: ...PO BOX 336 TEMPE AZ 85280 PHONE Toll Free 888 748 5884 FAX 888 678 6795 www metalmotor com...