Metal Motorsports 150KT, Руководство пользователя

Страница: 32 / 54

CHARGING THE BATTERY
Note: Do not turn the charger on before
attaching the charger clips to the battery
terminals.
The standard charging rate is 0.7A x
5 -10 hours. Maximum charging rate is
3A x 1hour
1. Attach the Charger to the battery
terminals. Red clip to the POS + side of
the battery. Black clip to the NEG - side
of the battery.
2. Plug in the charger and turn on making
sure it is set at the correct settings.
3. Once battery is charged, unplug the
charger before disconnecting the POS +
and NEG- clips
If not performed the correct way,
charging the battery could be
hazardous.
While charging battery, keep away
from sparks and open flames. The
battery gives off explosive gasses.
Always connect the charger to the
battery before turning the charger
on, this will prevent sparks when
attaching the terminal clips to the
battery.
Always unplug the charger before
disconnecting the battery from the
charger, this will prevent sparks
when removing the terminal clips
from the battery.
!
WARNING
Installing the battery
1. Install battery (1) behind the passenger
seat of the Go Kart.
2. Attach the red wire to the POS + side of
the battery. Attach the black wire to the
NEG - side of the battery. Make sure the
connections are tight.
3. Install battery protective cap (2) and
rubber strap (3) to hold battery in place.
CAUTION
Reversing the battery lead wires can dam-
age the charging system and the battery.
The red lead (clip) must go to the POS (+)
side of the battery. The black lead (clip)
must go to the NEG (-) side of the battery.
28
1
2
3