Metal-Fach T703A Скачать руководство пользователя страница 13

Страница: 13 / 64

INSTRUCTION MANUAL – T703A FARMING TRUCK TRAILER

1.5.3 Transporting to the User

The Trailer must be transported on its wheels, coupled to a tractor, or on a low-loading

platform, from the point of sale or from the manufacturer. Before it is loaded onto a low-loading

platform, couple it to the Tractor's hitch and connect the brake-system’s lines. Use unfolded

ramps to drive the Trailer onto the low-loading platform. Once on the low-loading platform,

secure the Trailer wheels with chocks.

Having done this, uncouple the brake lines and uncouple the Trailer from the tractor.

Then, secure the Trailer with special straps designed for securing loads when transporting

(transport belts, ropes, chains, guy ropes, etc.). Make a visual check to ensure the fastening

items are fully functional, i.e. they are not broken, worn, or the hooks are unbent. Install the

wheel chocks in such a way as to prevent the Trailer from moving. Secure the Trailer in such

a way as to prevent its movement during transportation.

Before unloading the Trailer, unfold the ramps, and then unlock the straps which

secured the Trailer against possible sliding down during transit. Next, drive the tractor close

enough to connect the brake lines. Finally, pull out the chocks from under the wheels of the

Trailer. When all of the above steps have been completed, proceed with driving the Trailer

down from the platform.

CAUTION

CAUTION!
General health and safety regulations must be observed when

loading and unloading the Trailer. Those operating the loading and

unloading equipment must have the required authorisation to use it.

CAUTION

CAUTION!
Pay particular attention to the angle of inclination of the ramps on the

low loader. It may not exceed 10°. Excessive inclination of the ramps

can lead to damage both the agricultural trailer and the transportation

trailer.

1.5.4 Transporting the Trailer by the User

The User may transport the Trailer by towing it to its destination with their own

agricultural tractor.

Before transporting the Trailer by yourself, it is absolutely essential to read this

Instructions Manual and to follow the guidelines therein.

Содержание T703A

































































Результаты поиска

Содержание T703A

Отзывы:

Похожие инструкции для T703A

Бренды по названию

Популярные бренды

Metal-Fach T703A, Инструкция по эксплуатации

Результаты поиска

Содержание T703A

Отзывы:

Похожие инструкции для T703A

Бренды по названию

Популярные бренды