Metal-Fach SEMAX OPTI 16, Руководство по эксплуатации, Страница: 29 / 52

METAL-FACH Heating Technology
27
Cleaning and maintenance of the boiler
(User)
ATTENTION!
The boiler may only be cleaned with the device disconnected from the power supply.
In order to use fuel economically, the furnace chamber and boiler convection channels should be kept clean.
The walls and shelves in the furnace chamber should be cleaned through the cleaning and inspection doors. The
boiler exchanger and ash pan are also subject to systematic cleaning.
Cleaning should be done with wire brushes on extension cords. The above activities should be performed
during periodic boiler standstill, preferably every 100 hours of boiler operation. Thorough cleaning of the boiler
should be performed once a month.
Instructions for the disposal of the boiler after its service life has expired
(User)
Before scrapping the boiler, disconnect all electronic components from it. They can be disposed of in
accordance with the European Directive 2002/96 / EC on the use of electronic and electrical equipment. For
proper disposal, please contact the manufacturer of electronic components according to the above-mentioned
European Directive.
The steel elements of the boiler should be scrapped in designated places (scrap purchase).
ATTENTION!
A worn-out boiler intended for scrapping and its components should not be disposed of
with general waste.