Metal-Fach N 267, Инструкция по эксплуатации, каталог запасных частей

Страница: 18 / 31

18
Fig. 5. Adapter mounting
Adapter disassembly procedure:
• Decouple the PTO drive-shaft from the adapter transmission.
• Remove the fastening bolts which attach the adapter to the side panels and remove the
adapter.
• Use a lifting device with the minimum capacity of 600 kg to remove the adapter.
Exercise extreme caution when assembling and disassembling (repairing)
the adapter. Due to the large weight of these components, use suitable lifting
equipment. The assembly and disassembly procedures must be performed
by two persons.
The vertical adapters and the attachment must be handled with the use of
a lifting device with the minimum capacity of 600 kg.
5.8. Brakes adjustment
5.8.1. Parking brake adjustment
The parking brake is adjusted by setting the initial cable tension by making a loop of a
suitable length on both cable ends.
The parking brake is functioning when it is capable of stopping the loaded
spreader on a slope with a grade of 18°.
5.8.2. Service brake adjustment
The braking system must be suitably adjusted to compensate the wear of the brake shoe
linings. If the actuator idle stroke is excessive, adjust as follows:
remove the cotter pin (3), remove the crown nut (1), loosen the brake expander lever (2) and
shift the lever in the direction opposite to the braking motion in such way that the lever is