Metal-Fach ecoMAX 860P, Руководство пользователя и инструкция по установке

Страница: 5 / 48

5
2. General information
Boiler regulator ecoMAX860P is a modern
electronic device intended to control boiler
operation with automatic feeding of solid fuel
and with the ignitors. Flame is detected via the
exhaust temperature sensor.
The regulator is a multipurpose device:
 it automatically maintains a preset boiler
temperature by controlling the fuel
combustion process,
 it controls timing fuel feeder and fan
(modulating its power),
 it automatically stabilizes a preset
temperature of the domestic hot water
container,
 it automatically maintains preset
temperature of several independent mixer
heating cycles.
The preset temperature of heating cycles and
the boiler can be set on the basis of a weather
sensor readouts.
The device includes the control panel with
horizontal regulation of its position, the main
operating unit and optional modules to control
additional heating circuits.
The regulator can cooperate with an additional
room panel ecoSTER200 and ecoSTER TOUCH
situated in living quarters and module for the
web WiFi ecoNET300.
It can be used in a household and similar
facilities, as well as in lightly industrialized
facilities.
3. Information about documentation
The regulator manual is a supplement for the
boiler manual. In particular, except for this
manual, the boiler manual should also be
observed. The regulator manual is divided into
two parts: for user and fitter. Yet, both parts
contain important information, significant for
safety issues, hence the user should read both
parts of the manual.
We are not responsible for any damages caused
by failure to observe these instructions.
4. Storage of documentation
This assembly and operation manual, as well as
any other applicable documentation, should be
stored diligently, so that it was available at any
time. In the case of removal or sale of the
device, the attached documentation should be
handed over to the new user / owner.
5. Applied symbols
In this manual the following graphic symbols are
used:
- useful information and tips,
- important information, failure to
observe these can cause damage of property,
threat for human and household animal health
and life.
The symbols indicate important information, in
order to make the manual more lucid. Yet, this
does not exempt the user from the obligation to
comply with requirements which are not marked
with a graphic symbol!
6. Directive WEEE 2012/19/UE
Act on electrical and electronic equipment.

Recycle the product and the packaging at
the end of the operational use period in an
appropriate manner.

Do not dispose of the product together with
normal waste.

Do not burn the product.