26
OPERATING INSTRUCTIONS - BelMix T659 FEED TRAILER
PERIODIC MAINTENANCE
Use strong (and preferably steel) ladders in a good
condition and with catch hooks (round, dia. 50 mm) to
enter the feeder trailer tank:
•
the platform ladder – 230-300 cm long with hooks
at 140 cm;
•
the tank ladder – 190-220 cm long with hooks at
190 cm;
wARNING!
Do not use damaged ladders with missing or cracked
steps, damaged rails and without safety elements
(hooks and anti-slip feet).
Always keep the ladder steps clean (free of mud,
grease or feed).
wARNING!
Use ladders with extreme caution near overhead
power lines.
wARNING!
Exercise extreme caution near overhead power lines
when loading feed into the tank.
wARNING!
Always clean the steps and the platform of mud (i.e.
the platform with the ladder).
wARNING!
DO NOT:
Enter the tank top edge or the mixing tank when the
feeder wagon is working.
cAuTION!
6.4. INSPECTION OF TYRES
1. When working with the machine wheels (e.g. wheel change, pressure
check, tightening), remember to secure the machine against
unintended movement – use wheel chocks.
2. Installation of tires and wheels requires adequate knowledge of
regulation-compliant tools.
3. All repairs of tires and wheels must be performed by the operators
and with the use of proper tools.
4. After each installation of the wheels, re-tighten their bolts after
the first 10 operating hours. Wheel nuts or bolts, then check the
tightening torque after every next 50 operating hours.
5.
Regularly check the tyre pressure. Follow the recommended
pressure values.
6.5. BRAKING SYSTEM
The T659 feeder wagon is equipped with a single-line braking system:
•
Service brake: pneumatically actuated, operates the axle wheels;
controlled from the driver's seat by pressing the tractor's brake
lever;