Metal-Fach BelMix T659 Скачать руководство пользователя страница 23

INFORMATION ON THE OPERATION OF FEEDER WAGON

23

OPERATING INSTRUCTIONS - BelMix T659 FEED TRAILER

5.9.  CLEANING

After the feed discharge run, thoroughly clean the feeder trailer of 

feed residues inside and at the gate guides. Use pressure cleaners. 

Dry the trailer in winter in a sheltered room above zero Celsius. Frozen 

water may damage the paint coat or machine components. Failure to 

follow the cleaning instructions may result in bacterial contamination 

hazards that cause illness of animals.

5.9.1.  MACHINE CLEANING INSTRUCTION

Before cleaning the feeder wagon, do the following:

• 

turn off the tractor's engine and remove the ignition key;

• 

secure the feeder wagon and the tractor against movement with the 

parking brake;

• 

decouple the PTO drive-shaft from the tractor;

• 

fully open the gates on the feeder wagon;

• 

secure the tractor against unauthorised access;

• 

wear protective clothing;

• 

wash the trailer thoroughly with strong water jet from a pressure 

cleaner and leave to dry.

5.9.2.  REMOVAL OF CLOGS

When unloading light feed components (hay, straw), the feed may stop 

moving to the discharge. In order to remove clogs during mixing, add 

other components (e.g. water) to force the movement of the entire 

mixture mass.

If a clog occurs during unloading and cannot be removed by full opening 

of the gate, the operator must intervene manually. Stop the tractor 

engine, remove the ignition key, enter the service platform and use a 

fork to move the feed clog away from the discharge opening.

5.10.  TRAVELLING ON PUBLIC ROADS

Before entering a public road:

• 

connect the trailer lighting system plug to the tractor and do a 

functional test of the lamps;

• 

check the condition and pressure of the tyres;

• 

check the condition and performance of the trailer pneumatic brake;

• 

check the tightening and safety of all nuts, bolts, joints and clamps;

• 

clean the machine;

• 

install the slow-moving vehicle warning triangle in the grip (at the 

trailer tank back).

When travelling on public roads:

• 

follow the traffic regulations;

• 

exercise extreme caution on sharp corners and bends;

• 

adapt your driving speed to the traffic.

Do not carry persons, animals or other objects in the 

feeder wagon's tank. 

Do not exceed 25 km/h when driving on public roads.

wARNING!

Содержание BelMix T659

































Отзывы: