Metaflex MDA120, Руководство по установке

Страница: 35 / 55

Installers manual 10.03.02-R03 (201058) EN SDA-04 (SW 5.xx) - SDA-04DCB2 (SW 22.00)
P
age 35 of 55
10 Fault codes and possible solutions
General External operation/control
Remove signal (Input 12)
Meaning Clear message
Full-open Inside Remove signal (Input 15)
Half-open Inside Remove signal (Input 16)
General
Special operation
Meaning Meaning
Initialisation in process Waiting until configuration is complete
Lock or sluice input 1 is active Cancel contact or sluice (Input 1)
One-way active Key or rotary switch (Input 2)
Any active electrical interlocks are lifted
up Restore "N.C." (Input 4)
Emergency stop operated Emergency stop is operated (Input 6 (or 1))
Door assumes fire position Restore "N.C." (Input 5)
Lock problem ->
no feedback Open circuit or lock not locking (Input 23)
General
Obstruction messages
Meaning Clear message
Obstruction in indentation Remove obstruction
Obstruction during opening Remove obstruction, door is too heavy,
check mechanical adjustments
Obstruction during closing Remove obstruction, door is too heavy, check
mechanical adjustments
Indentation boost =
retighten in indentation when closing Call the service department
DMS obstruction check Remove obstruction or
door has too much resistance