Metaflex MDA120, Руководство по установке

Страница: 31 / 55

Installers manual 10.03.02-R03 (201058) EN SDA-04 (SW 5.xx) - SDA-04DCB2 (SW 22.00)
P
age 31 of 55
(safety sensors)
41 - Sensor 1 mode
(I=29) 0=safety sensor / 1=Opening sensor
(n.c.) 0/1 0
42 62 Sensor 2 mode
(I=32) 0=safety sensor / 1=Closing sensor
(n.c.) 0/1/2 0
43 - Sensor 3 mode
(I=25) 0=Active while closing / 1=Active
while closing 0/1 0
44 - Sensor 4 mode
(I=26) 0=Active while closing / 1=Active
while closing 0/1 1
45 55 DMS 0=Door stops only at blocking
1..9: 1=Least sensitive, 9=most
sensitive 0/1..9 5
46 87 DMS open/close
factor 0=Opening DMS 3,25 times closing
DMS; 9=Opening DMS the same as
closing DMS 0..9 5
50 6 Start speed 1= Threshold speed; 9=220mm/s 1..9
5
51 3 Speed during
opening 1= Treshold speed; 9=800mm/s 1..9
5
52 4 Speed during
closing 1=Treshold speed; 9=400mm/s 5
53 5 Endspeed at
opening 1=Treshold speed; 9=120mm/s 1..9
3
54 - Endspeed at
closing 1=Treshold speed; 9= 120mm/s;
0=same as parameter 53 0/1..9
0
55 89 Slow mode to
beginning position Extra distance to run in slow mode
measured in cm 0..50 0
56 86 Slow mode to end
position Extra distance to run in slow mode
measured in cm 0..50 0
57 78 Extra force during
closing 0=Off / 1..9= On (1=weak, 9=strong) 0/1..9 0
58 77 Boost at the start
of closing 0=Off / 1..9= On (1=weak, 9=strong) 0/1..9 0
70 79 Output relay 1
function 0=lock / 1..9=see parameter 74 0/1/2/3/
4/5/6/7/8
9 (DCB)
10/11 0
71 66 Relay 1 mode 0=normally open, 1= normally closed 0/1 0
72 80 Output relay 2
function 0=interlock / 1..9=see parameter 74 0/1/2/3/
4/5/6/7/8
9 (DCB)
10/11 0
73 67 Relay 2 mode 0=normally open, 1= normally closed 0/1 0
74 63 Output relay 3
function 0=Off / 1=Door open / 2=4 sec
before and during closing / 3=door
semi-open / 4=Fault /
5 monitor check fotocell 1 /
6 monitor check fotocell 1 & 2 /
7=interlock output / 8=puls 500
msec at start opening / 9=battery
empty (DCB) / 10=not closed and not
blocked / 11=door not closed or any
error 0/1/2/3/
4/5/6
7/8
9 (DCB)
10/11 0
75 68 Relay 3 mode 0=normally open, 1= normally closed 0/1 0
76 58 Motorlock 0=input 1 activates lock / 1=input 1
activates lock and motorlock 0/1 0
77 60 Always locked 1=yes /0=Only at ‘Lock’ or one-way 0/1 0