Metabo SSE 1100 Скачать руководство пользователя страница 10

ENGLISH

en

10

hands. Therefore always hold the machine with 

both hands using the handle provided, stand 

securely and concentrate.

7.4 Working Directions

Sawing:

Use a saw blade geared to the material to be sawn.
SSEP 1400 MVT: Set pendulum motion according 

to the applications.
Adapt the stroke rate to the material to the sawn. 

SSEP 1400 MVT: Set maximum stroke rate 

according to the applications. 
Press the machine with the guide (9) against the 

workpiece. Switch on the machine, and only then 

guide the saw blade against the workpiece. 
Do not make contact with any objects or with the 

ground with the moving saw blade (danger of 

recoil!)
Avoid excessive pressure on the saw blade 

(particularly in the case of long saw blades).
If the saw blade jams, turn the machine off 

immediately. Widen the sawn gap slightly with a 

suitable tool and take out the machine.
After completing the sawing cut, switch off the 

machine and only take it out of the sawn gap to 

place it down once the saw blade has come to a 

standstill (danger of recoil).

Plunge cuts:

Plunge cuts may only be made in soft materials 

such as wood or plastic. Only use short saw blades.
Hold the machine with both hands at the intended 

handles, take a secure stance and concentrate on 

the work.

Set the adjustment lever (4) to the "0" position 

(pendulum motion is deactivated).

See illustration B, page 2: 
The machine is pressed with the edge of the guide 

(9) against the workpiece. The saw blade does not 

make contact with the workpiece. Switch on the 

machine. The corner of the guide serves as a pivot 

point around which the machine is slowly aligned, 

whereby the saw blade cuts into the workpiece. 

7.5 Sawing close to the wall

Set the adjustment lever (4) to the "0" position 

(pendulum motion is deactivated).

See illustration D, page 2.
When sawing near the wall, the saw blade can be 

put into the saw blade clamping fixture with the 

teeth pointing upwards (contrary to the normal 

working position). Ensure that the pendulum action 

is deactivated.

To saw tight curves: Use narrow saw blades.
Sawing metal: To increase the life of the saw 

blades, apply cooling lubricant (cooling lubricant 

rod 6.23443) along the cutting line.

On a regular basis, use compressed air to blow out 

the machine through the rear ventilation slots. 
Regularly clean the saw blade quick-clamping 

fixture (2) and blow out with compressed air. Do not 

oil or grease.

Use only genuine Metabo accessories.
Use only accessories which fulfil the requirements 

and specifications listed in these operating 

instructions.
See www.metabo.com or the catalogue for a 

complete range of accessories.

Repairs to electrical tools must ONLY be 

carried out by qualified electricians! 

Contact your local Metabo representative if you 

have Metabo power tools requiring repairs. See 

www.metabo.com for addresses.
You can download a list of spare parts from 

www.metabo.com.

Observe national regulations on environmentally 

compatible disposal and on the recycling of disused 

machines, packaging and accessories.

Only for EU countries: Never dispose of 

power tools in your household waste! Used 

power tools must be collected separately and 

handed in for environmentally compatible recycling 

in accordance with European Directive 2002/96/EC 

on waste electrical and electronic equipment and its 

implementation in national legal systems.

Explanatory notes on the specifications on page 3.

Changes due to technological progress reserved.
P

1

=Rated input power

P

2

=Power output

I

=Current

n

0

=Stroke rate at idle speed

s

=Stroke  length

m

=Weight without mains cable

Measured values determined in conformity with 

EN 60745.

Machine in protection class II

AC Power

The technical specifications quoted are subject to 

tolerances (in compliance with the relevant valid 

standards).

Emission values

These values make it possible to assess the 

emissions from the power tool and to compare 

different power tools. The actual load may be higher 

8. Tips and Tricks

9. Maintenance

10. Accessories

11. Repairs

12. Environmental Protection

13. Technical Data

Содержание SSE 1100





































































Отзывы: