Metabo KB 6875, Руководство по эксплуатации

Страница: 12 / 64

12
ENGLISH ENG
Only for EU countries: Never dispose of
power tools in your household waste! In
accordance with European Guideline
2002/96/EC on used electronic and electric
equipment and its implementation in national
legal systems, used power tools must be collected
separately and handed in for environmentally
compatible recycling.
Explanatory notes on the specifications on page 2.
Changes due to technological progress reserved.
M = Torque
B
St
= Maximum sheet thickness (sheet steel)
B
Al
= Maximum sheet thickness (aluminium)
P
1
= Nominal power input
P2 = Power output
h
0
= Stroke rate at idle speed
h
1
= Stroke rate at rated load
r
min
= Smallest curve radius
m = Weight without mains cable
Vibration total value (vector sum of three
directions) determined in accordance with
EN 60745
a
h
= Typical estimated acceleration
in the hand/arm area
(cutting sheet metal)
K = Uncertainty (vibration)
The vibration emission level given in this informa-
tion sheet has been measured in accordance with
a standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
The declared vibration emission level represents
the main applications of the tool. However if the tool
is used for different applications, with different
accessories or poorly maintained, the vibration
emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the
tool is switched off or when it is running but not
actually doing the job. This may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
Typical A-effective perceived sound levels:
LpA
= Sound pressure level
L
WA
= Acoustic power level
K
pA
, K
WA
= Unsafe (noise level)
During operation the noise level can exceed
85 dB(A).
Wear ear protectors!
Measured values determined in conformity with
EN 60745.
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
13 Technical Specifications
170268350_0108_Kn6875.book Seite 12 Donnerstag, 31. Januar 2008 10:28 10