GT-526S Manual Rev F
Page 18
5.12. Set Contrast Screen
Press ◄ or ► to improve display quality. Press Enter to save the setting or ESC to
cancel the change. Figure 24 shows the Set Contrast Screen.
SET CONTRAST
< > TO ADJUST
ENTER TO SAVE
███████
Figure 24
– Set Contrast
5.13. About Screen
Figure 25 shows the About Screen. The About Screen shows the firmware version and
programmable logic versions
on the second line. Press ▲ or ▼ to toggle between the
two version numbers.
GT-526S
81027 R1.1.0
A12345
www.metone.com
Figure 25
– About Screen
6.
Charging the Battery
Caution:
The provided battery charger is designed to work safely with this device. Do
not attempt to connect any other charger or adapter to this device. Doing so
may result in equipment damage.
To charge the battery, connect the battery charger to an AC power outlet and the DC
barrel connector to the socket on the right side of the GT-526S. The battery charger is
universal and will work with power line voltages of 100 to 240 volts, 50 to 60 Hz. A
discharged battery pack will take approximately 2.5 hours to fully charge.
When fully charged the battery inside the GT-526S will power the unit for about 6 hours
of continuous sampling. Under normal operation, the battery will power the unit for
about 24 hours. For continuous operation, operate the unit with the battery charger
attached. Charge the battery before storing the GT-526S. Storing a discharged battery
will degrade its performance.
