AEROCET 531S Manual
Page 4
AEROCET 531S-9800 Rev A.docx
1.
Introduction
The AEROCET 531S is a full–featured, battery operated, handheld particle counter or
mass monitor. In the count mode the unit will measure particle counts at fixed sizes of
0.5u, 1.0u, 5.0u and 10.0u. In the mass mode the unit will measure PM1, PM2.5, PM4,
PM7, PM10 and TSP mass concentration levels. It also has various communication
options. This instrument can store up to 6,000 sample events including data from the
optional ambient temperature (AT) / relative humidity (RH) probe (MOI G3120). Sample
history events can be viewed on the LCD display, printed on the optional printer (MOI
G3115) and download to a computer.
2.
Setup
The following sections cover unpacking, layout and performing a test run to verify
operation.
2.1.
Unpacking
When unpacking the AEROCET 531S and accessories, inspect the carton for obvious
damage. If the carton is damaged notify the carrier. Unpack and inspect the contents
of the shipping container. Standard items (included) are shown in Figure 1. Optional
accessories are shown in Figure 2. Contact the supplier if any items are missing.
ATTENTION:
The included USB driver CD must be installed before connecting the AEROCET 531S
USB port to your computer. If the supplied drivers are not installed first, Windows may
install generic drivers that are not compatible with this product.
To install USB drivers:
Insert the Comet CD. The install program should run automatically and display the
screen below. If an AutoPlay pop-up window appears, select “Run AutoRun.exe”.
Finally, select “USB Drivers” to start the install process.
