Met One Instruments AEROCET 531, Руководство пользователя

Страница: 17 / 30

AEROCET 531S Manual Page 16 AEROCET 531S-9800 Rev A.docx
5.5.
RECALL DATA
Screen
Stored sample events can be viewed from the Operate screen but this requires
navigating one record at a time to reach a desired record. The
RECALL DATA
screen
provides a way to quickly navigate to a record based on time. Figure 14 shows the
RECALL DATA
screen.
RECALL DATA
01 JAN’00 00:00
Figure 14 –
RECALL DATA
Screen
To recall data, enter the desired date/time string and select the
START/STOP
button.
The unit will recall the data from the date/time entered (if an exact match is found) or the
next most recent data available. The screen shown when the data is recalled is the
Operate screen. The unit will display “

” on the upper right corner of the display to
indicate history data.
5.6.
PRINT DATA
Screen
Stored sample events can be printed through the printer port within a user selected
range. To print selected data, select
PRINT DATA
from the menu. Figure 15 shows the
PRINT DATA
screen.
MEASURE: COUNTS
LOCATION: 001
01 JAN’00 00:00
18 AUG’06 13:23
Figure 15 –
PRINT DATA
Screen
Edit the location and time range to select which sample events to print. The following
table describes settings.
Setting Description
MEASURE
Print
MASS
or
COUNTS
data type events.
LOCATION
The location ID of the sample events to print. Setting
location to 000 prints all locations. Settable from 0 – 999.
01 JAN’00 00:00
The date/time to begin printing sample events from.
18 AUG’06 13:23
The date/time to stop print samples at.