Messoa NDZ760, Руководство пользователя, Страница: 9 / 80

Network Camera User’s Guide
9/80
2.2 Rear View
Audio Output Jack
Audio-out Jack allows this device to output audio or alerting sound.
DC Power Jack
The input power is 12VDC. Note that supply the power to the Camera with the power adapter
included in package. Otherwise, the improper power adapter may damage the unit and result
in danger.
Antenna Connector (for WLAN model)
User can attach the included antenna to this connector (SMA type) or use another high-gain
antenna to get higher performance.
Factory Default Reset
This button is hidden in the pinhole. This button is used to restore the all factory default
settings. Sometimes restarting the camera will make the system back to a normal state. If the
system still got problems after restart, user can restore the factory default settings and install
it again. To restore the device, please follow the steps below:
1.
Make sure the Camera is ready first. Insert the paper clip or other tool and press
and hold the button down continuously.
2. Hold it at least 5 seconds and release the tool while the Camera is operating.
Then the device has been restored to default settings and reboot again.
Note: Restoring the factory default setting will lose the all previous settings included IP
address forever. User needs to run the IPWizard II program to search the device and
configure it to let the device work properly again.
LAN Socket
The LAN socket is a RJ-45 connector for connections to 10Base-T Ethernet or 100Base-TX
Fast Ethernet cabling. This Ethernet port built N-Way protocol can detect or negotiate the
transmission speed of the network automatically. Please use Category 5 cable to connect the
LAN Socket
DC Power Jack
Audio Output Jack
Antenna Connector
Power/Wireless LED
LAN LED
DIDO
Micro-SD
Factory Default Reset