Messoa NDZ760, Руководство пользователя, Страница: 49 / 80

Network Camera User’s Guide
49/80
7.1.3 System: Configure and maintain system
Use this menu to perform the principal settings of the device.
7.1.3.1 System:
DIPS (Dynamic IP Service): -Function Discarded-
To enable or disable the DIPS® (Dynamic IP Service) function.
Device ID (for DIPS): -Function Discarded-
It’s a unique number of each device for identification and this ID is used for DIPS.
It’s feasible to locate your device from Internet by DDNS service. However, we provide another easier
way to do the same job called Dynamic IP Service, DIPS® .
To use this service, just follow four steps below:
(1) Enable DIPS function of the device
(2) Check your Device ID from this page. This is a unique number for each device.
(3) If your device is behind a NAT router, please configure your device properly. You could refer to
section
“Install the Camera behind a NAT Router” above. You only need to do this job one time.
(4) Visiting company
’s website, you can find DIPS service page as below:
Enter your Device Number and press
“OK” button.
Then, a new web page will pop up and link to your device accordingly.
You will see that DIPS is a much easier service than DDNS.