Messoa NDZ760 Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 80

Messoa NDZ760 Скачать руководство пользователя страница 52

Network Camera User’s Guide

52/80

Firmware Upgrade:

The device supports new firmware upgrade (the software that controls the operation in the device).
Please contact your dealer for the latest version if necessary.

Download the latest firmware file from our website or your dealer. Unzip this firmware file to binary file
and store it into your PC. Then follow the steps as bellow carefully:

1. Close all other application programs which are not necessary for firmware update.

2. Make sure that only you access this device while firmware updating.

3. Disable all event trigger and/or schedule trigger functions first.

4. In this web page, click

“

Browse

” button. Select the Firmware binary file.

5. Once the firmware file was selected, click

“

Firmware Upgrade

” button.

6. The upgrade progress information will be displayed. Once the uploading process completed, the
device will reboot the system automatically.

7. Please wait for timer countdown, and then you can use IPWizard II to search the device again.

«
...
50
51
52
53
54
...
»

Содержание NDZ760

















































































Отзывы:

Нет отзывов