24
HOW TO ENSURE EXCELLENT START-UP EVERY TIME
MANUAL START-UP
OPERATION No. 1
– lower the footboard and
press the fuel lever (located on the left side of the
engine) all the way to the right.
OPERATION No. 2
- set the "STARTER" air lever
to the intermediate position if the engine is warm
and to the far left if it is cold.
OPERATION No. 3
- set the accelerator at its
midpoint
OPERATION No. 4
– check that switch
“A”
(which turns off the unit and is located at the
upper right of the engine) is set to position
“
I
”
(ON) and not to
“
O
” (OFF).
It is best to perform this operation as soon as
you turn off the engine.
OPERATION No. 5
– grip the handle
“M”
of the starter device and pull slowly until it
exerts resistance. Then tug on the cord very fast exerting great force to overcome the
compression and start-up the engine. If the engine does not start-up immediately, release
the handle so that the cord can self-wind and then repeat the operation.
OPERATION No. 6
- to turn off the engine, set the accelerator to minimum and turn switch
“A”
from position
“
I
”
to position “
O
”.
WARNING!
The unit can only be started up with switch
“A”
in position “
I
”.
A
M
A
