HDM97Pocket Quick Reference
\\
7
www.ibpmedical.com
pH
(Available only in versino BP, if enabled in the Basic Settings)
Returns automatically back to measuring mode after 5 sec.
Selection between compensation 20°C, 25°C, 37°C and measured temperature
Reading min. value
F
F
Reading max. value
Flow
F
No function
Reset of both the min. And max. Value
ESC
Return to measuring display
(Available only in versino BL, BQ, if enabled in the Basic Settings)
Attenuation
Reading min. value
F
Reading max. Value
Returns automatically back to measuring mode after 5 sec.
Reset of both the min. And max. Value
ESC
Return to measuring display
Reset accumulated volume to 0
Timer
(If enabled in the Basic Settings)
OK
OK
OK
Afterwards
Afterwards
Timer
Timer
Timer
The cycle “start, stop and reset” can start again
No function
No function
Multifunction key: The first push starts the timer, the next push stops the stopwatch and pushing it agian
F
Timer Function
The reading of the timer is as follows.
TIMER
The display changes to MM/SS/DS automatically after 2 seconds
MM/SS/DS
00.00.0
minutes.seconds.tenthseconds
After 59 minutes and 59.9 seconds the display form changes so that hours, minutes and seconds are being displayed. The
tenth second display is not available then. After 9 hours, 59 minutes and 59 seconds the stopwatch stops itself.
HH/MM/SS
0.00.00
hours.minutes.seconds