HDM97Pocket Quick Reference
\\
3
www.ibpmedical.com
Access Connectors
Depending on the configuration the appliance part consists of a BNC inlet for pH electrode connection, a male connector
for pressure transducer inlet, a connector for the flow probe and a directly attached cable which leads to the conductivity /
temperature probe or connector for the probe. The appliance part is isolated against the USB-Connector withstanding 4000V
AC or 6000V DC for one minute minimum according to ISO EN 60601-1.
USB CONNECTOR / CHARGING THE BATTERY
The USB connector is mounted on the right side of the instrument. It is implemented as a
Mini-USB-A receptacle. The current consumption of the HDM97Pocket (all versions) can be up
to 500 mA while charging the battery. The USB connector can be used to charge the battery and
communicate with the instrument at the same time. The period for charging an empty battery to
100% is approximately 3 hours.
ATTENTION: The USB connector is not part of the appliance part.
HDM97BL
HDM97BH
HDM97BN
HDM97BO
Flow
Pressure
Conductivity
Temperature
Conductivity
Temperature
Pressure
Conductivity
Temperature
Conductivity
Temperature
Pressure
Pressure
pH
Flow
Conductivity
Temperature
Pressure
Flow
HDM97BP
HDM97BQ
HDM97BQ
with Option C (conductivity probe connector)