Mesa MSL-500-p, Руководство по эксплуатации

Страница: 5 / 12

MSL-500-
P
ELECTRONIC LOCK INSTRUCTIONS
|
PG.4
if the lock responds
[See Wrong Try Penalty; bottom of page]
Replace the existing batteries with new ones
[See Changing Your Batteries; pg. 7]
The Lock Is Responding but Does Not Unlock
Make sure you are getting a valid response
Make sure you get a signal with every key stroke
Make sure you are not in Time Delay mode
[See How To Open In Time Delay; pg. 7]
Replace the existing batteries with new ones
[See Changing Your Batteries; pg. 7]
If the lock still does not open, contact M
E S A
S
A F E
C
O M PA NY
Technical Support :
888.381.8514 [Monday thru Friday 7AM - 4PM/PST ]
SAFE OPERATION & PROGRAMMING
Your Master Code is factory set to :
NOTE : The Master Code should always be held by the owner of the safe.
You will not be able to activate/delete users, set up single/dual entry and
set up time delay without the
Master Code .
HOW TO OPEN YOUR SAFE
Single User Mode
[Default Setting]
1
Input : Code - # [light stays green for 5 seconds]
2
Turn the handle clockwise before the green light disappears
Example :
Invalid Code: Red light along with 5 ‘ Beeps ’
Dual User Mode
[Please refer to Setting Single User & Dual User Mode; pg. 6]
1
Input : 1
st
Code - # [lock will ‘ Beep ’ 2 times]
2
Input : 2
nd
Code - # [light stays green for 5 seconds]
3
Turn the handle clockwise before the green light disappears
Example : 1
st
Code - # - 2
nd
Code - #
Invalid Code: Red light along with 5 ‘ Beeps ’
Wrong Tr y Penalty
If 4 wrong codes are entered, the keypad will not accept any codes for 5
minutes . If you press any key during this penalty, the orange light will turn on
for approximately 2 seconds and you will hear a ‘ Beep ’.
* * * * * * * * * * *
* * * * * * * * * * * * *