Mesa MSL-500-p, Руководство по эксплуатации

Страница: 10 / 12

PG.9
|
MSL-500-
P
ELECTRONIC LOCK INSTRUCTIONS
USING THE OVERRIDE KEY
1
With the keypad face removed, locate the
override key slot inside the keypad collar, on the
left .
See Figure E
2
Using your key, with the larger/longer notches
facing UP , place the key into the slot.
You may need to angle the key slightly in order
for it to slide in properly.
See Figure D
3
Make sure the key slides completely into the
slot, the pin fitting into the end of the key.
See Figure E
4
Once key is snug, turn counter clockwise [left]
to the 8 o’clock position .Your safe will be
unlocked.
See Figure
F
REINSTALL THE KEYPAD FACE
CAUTION : Be EXTREMELY careful with the wiring.
Do NOT pinch wires in between the keypad face & the
keypad collar.
1
With your fingers, carefully grip the keypad face, holding it so the face is out & the
numbers are right side-up.
2
Re-attach to the keypad collar by inserting bottom first , so the notch connects,
then carefully press/push into keypad collar casing.
3
Once the keypad face is snug in place, screw the keypad face back to the keypad
collar & replace the “MESA” bubble sticker.