Mertz Boxer 999-935 Скачать руководство пользователя страница 54

Страница: 54 / 84

4-2

Routine Service and Maintenance

Daily Maintenance Procedures

Do the following procedures daily or every 10 operating hours:
1. Check condition of all warning and instructional decals. Before operating the machine,

replace any missing or damaged decals.

NOTE:

Make sure to read and understand all WARNING and SAFETY decals before

operating the machine.

2. Check engine fuel and fill as needed - be sure engine is OFF

a. The Boxer has a saddle tank (Item 1,

Figure 4–1

), on each side of the machine.

Figure 4–1 Fuel Level Check

b. Each of the tanks has a fuel gauge located in the filler cap (Item 2,

Figure 4–1

). Remove

cap and visually inspect fuel level to make sure that the indicator is showing the proper

fuel level. Make sure that each tank has been filled on a daily basis.

Carefully pour gas into the tank, not exceeding the max fill indication shown by the gauge

in the fuel cap.

• Allow engine to cool before filling fuel tanks.
• Do not overfill because fuel could spill onto hot engine parts and ignite or explode.

2087

CAUTION

Содержание Boxer 999-935





















































































Результаты поиска

Содержание Boxer 999-935

Отзывы:

Похожие инструкции для Boxer 999-935

Бренды по названию

Популярные бренды

Mertz Boxer 999-935, Руководство оператора

Результаты поиска

Содержание Boxer 999-935

Отзывы:

Похожие инструкции для Boxer 999-935

Бренды по названию

Популярные бренды