As at 09/07
12
Chapter 4: Binary inputs
4.2
Binary inputs, 4-gang
Binary input REG-K/4x24
Multi-function.counter 12BA/1.0
Art. no. 644892
A description of the actions is given below:
– Transmit the start value, then increase cyclically by
the step value:
If no cycle time is running, the start value is trans-
mitted immediately and a new cycle time is started.
If a cycle time is already running, this is interrupted,
the start value is transmitted and a new cycle time
is started.
– Transmit the end value, then reduce cyclically by the
step value:
If no cycle time is running, the end value is transmit-
ted immediately and a new cycle time is started. If
a cycle time is already running, this is interrupted,
the end value is transmitted and a new cycle time is
started.
– Increase the current object value cyclically:
Increase the current object value cyclically by the
parameterised step interval.
– Increase the current object value once:
Increase the current object value once by the para-
meterised step interval. An active cycle time is ter-
minated.
– Reduce the current object value cyclically:
Reduce the current object value cyclically by the pa-
rameterised step interval.
– Reduce the current object value once:
Reduce the current object value once by the para-
meterised step interval. An active cycle time is ter-
minated.
– Reverse the slide direction and transmit cyclically:
If no cycle time is running, the slide is pushed in the
opposite direction (of this push-button) and a new
cycle time is started. If a cycle time is already run-
ning, it is interrupted, the slide is immediately pu-
shed in the opposite direction (of this push-button)
and a new cycle time is started.
– Move step-by-step to the limit values, and then back
again:
The limit values are approached by one step interval
at a time. When a limit is reached, the slide direction
is reversed for the next action.
– none (stops cyclical transmission):
No action is carried out, and any active cycle time is
stopped.
– no change:
No action is carried out, and any active cycle time is
continued.
|
You can only maintain the limit values and the
toggling to a new slide direction by operating on
site!
Communication objects
You can select the following communication objects:
The scene retrieval function does not access the inter-
nal scene module, but only accesses the bus external-
ly via communication objects.
There are two types of scene function:
– normal
– extended
With the standard scene function, a scene is retrieved
by a brief push-button action while a long push-button
action is used to save a scene. You merely have to set
the time after which a push-button action is identified
as being long, together with the status LED control
and the scene address.
With the extended scene function, a wider range of
functions are available. You can set actions for a shor-
ter or longer activation time for both pressing and re-
leasing the keys. You can also program a cycle time.
Depending on how many objects you have set in the
scene function, you must make the settings in additio-
nal windows ("Input X - object A") or ("Input X - object
B"):
Function
Object name
Type
Prio
Flags Behaviour
Input X
Value object A
1 byte Low
WCT Transmit/re-
ceive
Retrieving scenes
Tab
Parameter
Input X
Functional selection
Detection of long activation time
from 100 ms * Factor (4-250)
Scene function
Only with "extended"
Number of objects
Only with "normal scene func-
tion"
Scene address (0-63)
t
press
release
long activation time
action direct
at pressing
button
action at arrive of
long activation time
action at release
after arriving long
activation time
action at release
before arriving long
activation time
