As at 09/07
16
Chapter 4: Binary inputs
4.2
Binary inputs, 4-gang
Binary input REG-K/4x24
Multi-function.counter 12BA/1.0
Art. no. 644892
When "Functional selection" has been set to "Toggle" in
the "Input X" tab:
When "Functional selection" has been set to "Swit-
ching" in the "Input X" tab:
When "Functional selection" has been set to "Dim-
ming" in the "Input X" tab:
When "Functional selection" has been set to "Blind
control" in the "Input X" tab:
Parameters and settings
General
Parameter
Setting
Additional startup delay of the ap-
plication 1s * factor
0 - 30,
0
default setting
Debounce time 10ms * factor
2 - 15,
2
default setting
Input X
Parameter
Setting
Functional selection
Toggle
Switching
Dimming
Blind control
Pulse edges 1 bit, 2 bit (priority),
1-byte values
Pulse edges with 2-byte values
8-bit linear regulator
Scene
Impulse counter
Switching counter
Reset counter
Cyclical monitoring
Operating mode
make contact
break contact
Input X
Parameter
Setting
Functional selection
Toggle
Number of objects
one
two
Object A/B
1 bit
1 byte in steps 0 % - 100 %
1 byte infinitely 0 - 255
Value
100 %
adjustable in steps of ten as well
as 25% and 75%
Value
0 - 255,
255
default setting
Input X
Parameter
Setting
Functional selection
Switching
Number of objects
one
two
Object A/B
1 bit
1 byte in steps 0 % - 100 %
1 byte infinitely 0 - 255
Value
ON telegram
OFF telegram
Value
100 %
adjustable in steps of ten as well
as 25% and 75%
Value
0 - 255,
255
default setting
Input X
Parameter
Setting
Functional selection
Dimming
Detection of long activation time
100 ms * Factor (4-250)
4 - 250,
6
default setting
Dimming direction
brighter
darker
brighter and darker
Dimming steps (brighter)
to max. brightness
1/2 brighter
1/4 brighter
1/8 brighter
1/16 brighter
1/32 brighter
1/64 brighter
Dimming steps (darker)
to min. brightness
1/2 darker
1/4 darker
1/8 darker
1/16 darker
1/32 darker
1/64 darker
Cyclical transmission of the
dimming steps
yes
no
Base for cyclic interval
0.1 seconds
1 second
1 minute
1 hour
1 day
Factor for cyclic interval (3-255)
3 - 255,
8
default setting
Stop telegram after release
enabled
disabled
Input X
Parameter
Setting
Functional selection
Blind control
Detection of long activation time
from 100 ms * Factor (4-250)
4 - 250,
6
default setting
Direction of movement
UP
DOWN
up and down
with position values
Change in direction for slat adjus-
tment from 100 ms * Factor (5-50)
5 - 50,
10
default setting
Selecting the positioning
one position (press briefly)
two positions (differentiation
between short/long operation)
Position value 1 (short operation)
in steps of 0 %- 100 %
infinitely 0-255
Value for blind position
with "steps":
0 % - 100 % in
steps of 10,
100 %
default set-
ting
with "infinitely":
0 - 255 in single
steps,
255
default setting
