Changing the battery
57
Restoring original remote control functions
In some situations it may be useful to restore the original functions
of the remote control, e.g. if the remote control memory is full and
you want to set it up for a specific device or program in an additional
key function. The remote control is then reset to its factory settings,
and
all
user settings are deleted.
1
Press
[SET UP]
for three seconds.
– The display shows
,
and “
CONFIG DEVICE ?
”.
– The background lighting is switched on.
– The keys that you can use are flashing.
2
Using
[
▼
]
and
[
▲
]
, select “
RESET IR?
”.
3
Using
[
▼
]
and
[
▲
]
, select “
RESET IR?
”.
4
Press
[OK]
.
5
Press
[OK]
again.
All original functions are restored; extended functions are deleted.
When the battery status indicator
on the display starts
flashing, the battery is low and you should change the batteries. All
user settings are retained when the old batteries are removed.
1
Pull the release lever back and lift off the cover.
2
Insert three new batteries (AAA/R03).
– Make sure that the polarity is correct (see battery
compartment).
3
Put the cover back and lock it into place.
|
Dispose of your used batteries according to statutory regulations.
Batteries should not be placed in normal household garbage.
Changing the battery
Содержание CONNECT 5069 SERIES
