7
7.1
7.2
NI1404-F01
2
1
S
S
S
S
5.1
POSITIONING
THE
APPLIANCE
Position
the
appliance
in
the
point
of
installation,
away
from
sources
of
heat
and
direct
sunlight.
The
appliance
is
not
suitable
for
outdoor
use
and
it
is
also
not
recommended
to
install
it
in
very
damp
rooms.
- Adjust
the
feet
in
ground
models
(
1
) to make the structure level (fig.7).
- The
appliance
should
be
positioned
in
such
a
way
as
to
leave
approximately
10
cm
of
space
free
S
for
air
to
circulate
freely;
the
condenser
side
must
be
easily
accessible
for
cleaning.
- Special ventilation grills/slits must be prepared in the undercounter model’s housing
compartment to favour disposal of the heat produced by the refrigerating circuit
(fig.10).
We recommend creating 300x300 mm or of equivalent measure ventilation
grills
- Make sure the water cooler is resting fully on all four supporting feet.
-
For safe and correct functioning the appliance must be placed flat
5
INSTALLATION
GB
10
