MEROTEC Yard force YF48vRX-RER38, Руководство пользователя

Страница: 29 / 45

29
needed to control the speed. The mower will freely roll if it is moved on an inclined surface without
pressing the brake pedal or setting the parking brake. Failure to follow these instructions can result
in loss of control and result in death, serious personal injury, or property damage.
WARNING!
Use care when loading or unloading the mower onto a trailer. Ensure the cutting deck is raised to the
highest position so that it is not caught on the ramp. The wheels on the mower can go off the ramp
or trailer, causing the mower to pivot or tip over, and result in a crush hazard that can cause death or
serious personal injury.
• Park the mower on a level surface.
• Raise the cutting deck to the highest position.
• Position and secure ramp to the trailer according to manufacturer’s instructions.
NOTE: We recommend you use one full width loading ramp that is at least 1 ft. wider than the mower to
minimize the risk of the mower’s wheels going off the side of the ramp.
• Slowly drive the mower onto the ramp and into the trailer.
• Lower mower deck completely.
• Set the parking brake.
• Turn off mower and remove key.
• Secure the mower as needed using straps or cables to prevent movement during transport.
WARNING!
To avoid accidental starting or movement that could result in serious personal injury, always remove
the start key and set the parking brake when transporting the mower.
MAINTENANCE AND STOARGE
WARNING!
Before performing any maintenance, stop the mower, wait for the blades to come to a complete
stop, and remove the start key to avoid accidental starting and possible serious personal injury.
WARNING!
Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so
could result in objects being thrown into your eyes resulting in possible serious injury.
WARNING!
When servicing, use only authorized replacement parts. Use of any other parts can create a hazard
or cause product damage.
WARNING!
Strictly adhere to all torque wrench tightening specifications. Failure to do so could cause serious
personal injury.
NOTICE
!
Periodically inspect the entire product for damaged, missing, or loose parts such as screws, nuts,
bolts, caps, etc. Tighten securely all fasteners and caps and do not operate this product until all
missing or damaged parts are replaced. Please
contact Yard Force Customer Service at 866-602-
9690 or a qualified service center for assistance.
MAINTENANCE AND STOARGE
Fig. 21