manualshive.com logo in svg

Merlin Integrated Signal Processor ISP-100, Руководство пользователя

Поделиться
Скачать
Merlin Integrated Signal Processor ISP-100 Скачать руководство пользователя страница 83

8-13

Processing Components - Crossover

Two-way Linkwitz-Riley Crossovers
Linkwitz-Riley designs constitute a special, even-order in-phase
class of two-way sum-to-allpass response crossovers, and they
must be configured in accordance with very strict phase and
polarity requirements.

A properly implemented 2-way, 12 dB/octave Linkwitz-Riley
crossover is characterized by:

• 2

nd

-order Linkwitz-Riley (Butterworth-Squared) lowpass filter, -6

dB magnitude response at crossover frequency

• 2

nd

-order Linkwitz-Riley (Butterworth-Squared) highpass filter,

-6 dB magnitude response at crossover frequency

• polarity of highpass band opposite that of lowpass band

A properly implemented 2-way, 24 dB/octave Linkwitz-Riley
crossover is characterized by:

• 4

th

-order Linkwitz-Riley (Butterworth-Squared) lowpass filter, -6

dB magnitude response at crossover frequency

• 4

th

-order Linkwitz-Riley (Butterworth-Squared) highpass filter, -

6 dB magnitude response at crossover frequency

• polarity of highpass band the same as that of lowpass band

Summarizing: In a 2-way, 12 dB/octave Linkwitz-Riley crossover
the high band must be out-of-phase with the low band; in a 2-
way, 24 dB/octave Linkwitz-Riley crossover the high band must
be in-phase with the low band.

Three-Way Crossovers

Figure 8-5 Three-way crossover implementation.

In the ISP-100, 3-way crossovers are implemented as shown in
Figure 8-5.

This parallel structure was selected over the more common binary-
tree structure for its suitability to the distribution of filters among
multiple DSPs. The parallel structure is also capable of perfect

Содержание Integrated Signal Processor ISP-100



















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды