manualshive.com logo in svg

Merlin Integrated Signal Processor ISP-100, Руководство пользователя

Поделиться
Скачать
Merlin Integrated Signal Processor ISP-100 Скачать руководство пользователя страница 66

7-14

10 July 1998

I/O Properties (see Figure 7-21)

Figure 7-21 I/O properties dialog.

Input
The Input Function controls the levels entering the unit. This function
can be accessed in any of the following three ways:

1. Clicking on the green input triangles.

2. Right clicking on either the green input or green output triangles and
selecting Properties from the pop-up list.

3. Clicking on the I/O Slots entry in the Project Manager and then
clicking on the Properties button.

Using the Stereo Control
This button controls the tracking of the Gain/Attenuator levels. If
the LED is gray, then the two channels do not track each other. If
the LED is blue, then the channels track each other. Clicking on
the button will toggle the setting.

Gain
To change settings, click on the arrow next to the number in the
text box. A selection list will appear. The list may or may not be
scrollable. Click on the desired entry to make a selection.

Using the Pad Control
This button controls the insertion of a -20dB pad in the signal
path. A gray LED on the button indicates the pad is not inserted.
A red LED on the button indicates that the pad is inserted.
Clicking on the button will toggle the setting.

Содержание Integrated Signal Processor ISP-100



















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды