Merlin Condor 1380, Инструкция по эксплуатации

Страница: 5 / 40

5
Bend the landing gear and install it to the
landing gear slot under the fuselage Slide the propeller onto the motor shaft
Tighten the propeller with the 1.5mm wrench
provided
Pre assemble main wings by inserting the
wing strengthening tube into the hole on the
main wings
Ensure the tube is fully inserted so the wing
halves make contact
Disassemble and reinsert the main wings
over the tube from each side of the fuselage
1
2
3 4
5 6
Assembly Guide