[!]
electrical check
�
connect wire leads to auxiliary
terminals if required
-II-
auxiliary switch contacts are
closed when circuit breaker is
closed
-11- alarm switch contacts are
closed when circuit breaker is
tripped
�
auxiliary switch contacts are
open when circuit breaker is
closed
�
alarm switch contacts are
open when circuit breaker is
tripped
�
knock out one of the precut
openings depending on the
desired direction of wiring
(see page 7)
Slip the wire leads through this
opening.
m
replace the front cover,
making sure the wire leads are
properly routed and will not be
pinched by the cover.
Install the mounting screws
[!]
add accessory identification
and wiring label to left side of the
circuit breaker
12
auxiliary switch
a -
use a buzzer or light indicator
attached to 11 and 14 terminals
and replace front cover
b-
turn circuit breaker
ON.
Indicator light or buzzer should
operate.
alarm switch
a-
use a buzzer or light indicator
attached to 91 and 94 terminals
and replace front cover
b-
turn circuit breaker
ON.
Trip breaker by pressing the red
push to trip button.
Indicator light or buzzer should
operate.
c-
move breaker handle to
ON.
Indicator light or buzzer should
remain
OFF.
2 auxiliary
1
auxiliary
+
1
alarm
3 auxiliary
+
1
alarm
E,,E3,
12 b 32
14 �34 E3, Eg, E,, E31
32 bg2 b12 b32
34
�94
�14 �34
E2,Eg,
22 b 92
24 �94
0
www
. ElectricalPartManuals
. com