MERIT INDUSTRIES Megatouch XL, Техническое руководство по обслуживанию

Страница: 45 / 65

DIP switch settings for the Mars 2000 Bill Acceptor
(The DIP switches are located on the side of the bill acceptor)
SETTING SWITCHES
1 WAY DIP 1 ON/DIP 2 OFF
2 WAY DIP 1 OFF/DIP 2 ON
4 WAY DIP 1 ON/DIP 2 ON
HIGH ACCEPTANCE DIP 3 OFF
HIGH SECURITY DIP 3 ON
*$1 DIP 4 ON=ACCEPT/OFF=REJECT
*$2 DIP 5 ON=ACCEPT/OFF=REJECT
*$5 DIP 6 ON=ACCEPT/OFF=REJECT
1 PULSE PER DOLLAR DIP 7 OFF
*4 PULSES PER DOLLAR DIP 7 ON
ALWAYS ENABLE DIP 8 OFF
HARNESS ENABLE DIP 8 ON
* Recommended factory settings allow for acceptance of $1, $2 and $5 bills at 4 pulses per
dollar.
Setting the Coin-In Menu
Settings for the bill acceptor are controlled by the settings for Electronic Mech 2 (2E) in the
Coin-In Menu screen.
To set the Coin-In Menu to provide a bonus credit for the use of a dollar, set the number of
coins (for Electronic Mech 2) to “4” and set the number of credits to “5.” This will provide 5
credits for each dollar entered. “Meter Pulses” can be set to “4” to record the amount of
“coins” in the cashbox, or it can be set to “5” to record the number of credits played,
depending on your individual need. An illustration of the coin-in menu set to offer 5 credits
for a dollar, with the meter counting coins, is shown below.
See your owner’s manual for complete operating instructions for the Coin-In Menu.
4
1
5
1
4
1
=
CREDITS
&
2E
1E
COIN
INPUT
COINS
METER PULSES